Interesting Research on – What No One Ever Told You

How to Find Hidden Piping and Valves

It is important that you know the details of your home like the back of your hand in case you are a homeowner. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Below are some of the ways that you can be able to find out where the various valves are located.

In order to locate the gas shutoff valve then you need to find out if you have natural gas since the shutoff valve will be located outside the home just before the gas meter. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. A second valve is usually located further down the line or where the gas pipe first enters.

There are high chances that the gas pipes you have are made from flexible copper if you own a modern home and the valves are most likely to be located in the utility room. When you have such a piping system you are usually sure that the gas system that you have usually has a high pressure. Such gas systems usually have the shutoff valve near the water heater or the furnace.

There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. Cold environments usually have the shut off points located in the house so that they do not freeze. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.

If you are finding it hard to find the valves then consider looking at property reports that you got at the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. With the report, you are able to see the picture of the valves so that you are able to know how they look like so that you can shut them off.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. For such valves using a metal detector may come in handy since they are usually metallic in nature. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.

Leave a Reply

Your email address will not be published.